The entry into force of a set of rules for the design of new buildings with domestic gas
The document prescribes the installation of control systems of gas contamination of the premises. The code of rules came into force on 6 of June 2019. The document regulates all safety requirements in the design and operation of gasified residential buildings, including requirements for premises and placement of gas-powered equipment, requirements for gas-powered equipment, domestic gas pipelines, including pipe joints, requirements for engineering and technical support of premises with gas-powered equipment , requirements for design solutions to ensure fire safety and safe operation of gas-powered equipment. As well as the requirements for the operation of gas consumption networks in residential single-family, blocked houses and apartment buildings.
In particular, gas contamination control systems with automatic shutdown of gas supply in multi-apartment residential buildings should be installed in heat generation, designed for built-in or attached public buildings, in the apartments when placing gas-powered equipment in them. Gas detectors should be interlocked with a high-speed shut-off valve installed first along the gas flow on the internal gas pipeline of a residential building. At the same time, government standard GOST R 56288–2014 “Window structures with double-glazed windows are easy to reset for buildings. Technical conditions” is valid from 2014, but before the entry into force of the set of rules 402.1325800.2018, window designs that meet this standard were practically not used due to the higher cost compared to conventional windows.